Meraki

Newbie101 · ‎Apr 26 2019

Thanks Brecht 🙂 By Disabling the SSID's on the box, will the MX64W inherit the SSID setup?

Newbie101 · ‎Apr 26 2019

Thanks for coming back to me lkajcsu01 🙂 Unfortunately, this is something I have tried already. The devices still see them as two separate networks.

Newbie101 · ‎Apr 26 2019

Thanks for coming back to me Borisorism 🙂 I thought as much but was hoping there was some sort of way through group policy for network-wide. In this case, would we be able to disable the wireless on the MX64W and connect an MR33 to inherit the wireless? I am not sure if the ports provide POE though to power the AP.

Newbie101 · ‎Apr 26 2019

Hi Guys, We have recently installed an MX64W in one of our smaller offices. The issue we are having is that the wireless on the MX64W is not inheriting the SSID's from the rest of the Meraki Estate. The SSID's appear to be configured in Wireless > SSID's. This office network only provides the Security & SD-WAN tab on the left hand side. We can configure Wireless SSID's in Configure > Wireless Settings however, this does not connect devices from the other offices automatically unlike the rest of the estate. The other offices all have MR33's installed which does provide a wireless tab. Is this the issue as Meraki has nowhere to push the SSID config? Any feedback would be great, Thanks

Meraki

Community

About Newbie101

Newbie101

Community Record

Re: MX64W SSID Issues

Re: MX64W SSID Issues

Re: MX64W SSID Issues

MX64W SSID Issues