Meraki

nitin1234 · ‎Feb 13 2023

Hi All, we have implemented Meraki Network, the customer was using HP switches. They have IPTV setup which is running on Meraki now. we are facing freezing issue in the IPTV network. below is the connectivity diagram. ======================================================================== IPTV Switch( Meraki ms225) ------10G FIBER -----Core switch stack(MS425)----10G FIBER-------(EDGE SWITCH)---- TV =========================================================================================== We have three VLANs for IPTV ( 210 for tv), (221 for the encoders), and ( 82 for the IPTV server). IGMP snooping is enabled on all switches and flood unknown multicast traffic is disabled. IGMP enabled on 210 and 221 VLAN. IGMP rendezvous point is configured for 221 VLAN. Is anyone using the same setup, any input would be appreciated. Thanks, Nitin

nitin1234 · ‎Nov 4 2020

Hi cgunz410, I was also facing the same issue so we have changed the port 80 (listen port ) becuase we were not getting response back on that port. So, my suggestion is you can change the public port and send the traffic on port 80. port forwarding rule source ip = any , source port= 81 ( for example 81. you can set any free except 80), Dest IP= NVR IP , Dest Port= 80

nitin1234 · ‎Apr 1 2020

I am working since 2010 in the IT domain and I have more than 2-year experience in MERAKI products. I have Joined the Meraki community because this is a great platform to share and get knowledge and experience.

Meraki

Community

About nitin1234

nitin1234

Community Record

Badges

IPTV on Meraki Network

Re: Meraki Firewall Settings

Hello Everyone

Hello Everyone