Meraki

Community

About Microfiche

Re: How to create a 2GHZ only SSID

by in Wireless
‎Jul 17 2019 8:18 AM
1 Kudo
‎Jul 17 2019 8:18 AM
1 Kudo
FYI - they can do this for the MR18 as well - just did it to hopefully solve a Nest Cam issue... ... View more

Re: Slow client VPN speed

by in Security & SD-WAN
‎Mar 26 2019 3:10 PM
‎Mar 26 2019 3:10 PM
Set to auto negotiate. Connected at 1Gbps ... View more

Re: Slow client VPN speed

by in Security & SD-WAN
‎Mar 26 2019 7:35 AM
1 Kudo
‎Mar 26 2019 7:35 AM
1 Kudo
@kYutobi wrote: Which is just around 1.42Mbps. Another good test would be to check speed on another wireless connection or (hotspot) see what your results are too. 177 kbps = 1.42 mbps?   I will be in another province tomorrow, will try from there. ... View more

Re: Slow client VPN speed

by in Security & SD-WAN
‎Mar 26 2019 7:15 AM
‎Mar 26 2019 7:15 AM
The laptop and the desktop are both connecting from my home network. Those are the only 2 computers I have tested from. The speed over the laptop VPN is similar to a non-VPN connection - hence fine. The speed over the desktop connection seems to be about 170 kbps. ... View more

Re: Slow client VPN speed

by in Security & SD-WAN
‎Mar 26 2019 4:51 AM
‎Mar 26 2019 4:51 AM
Looks like it is machine specific - connecting from my laptop works fine. Both are Windows 10. ... View more

Re: Slow client VPN speed

by in Security & SD-WAN
‎Mar 26 2019 4:39 AM
‎Mar 26 2019 4:39 AM
Upgraded to 14.39 and recreated the VPN on my desktop. No change at all. Also enabled timestamping. Switched my MTU back to 1500 as 1400 made no difference. It almost looks like the speed is being capped because it is so stable at 177 kbps. Weird.     ... View more

Re: Slow client VPN speed

by in Security & SD-WAN
‎Mar 25 2019 6:45 AM
‎Mar 25 2019 6:45 AM
Thanks, tried the MTU change - no difference. Ran out of time to try the  timing, will try this evening. My MX is showing "Up to date. Current version: MX 13.36" ... View more

Slow client VPN speed

by in Security & SD-WAN
‎Mar 23 2019 9:10 AM
‎Mar 23 2019 9:10 AM
Windows 10 client connecting to an MX64, authenticating using AD. I am able to connect without any problem, however it is painfully slow. Copy a file from a shared drive on the office network  runs between 170-350 kbps We have a 10 mbps connection at the MX64 and a 150 mbps at my house. Lots of bandwidth available at the MX64 uplink. I have deleted and recreated the connection a few times, I am baffled. I use some remote desktop connections to various servers on the corporate network that I have been using forwarded ports at the MX to connect via RDP, but I would like to shut those down and only use RDP over VPN. The RDP connection is almost unusable over the VPN currently. Ideas? ... View more
© 2025 Cisco Systems, Inc.