"Do I really need to create profiles in Systems manager for each and every profile on this page?"   I would suggest that this is ALWAYS the case for one simple reason:   If you were to bundle all of them together, and apply them to a device, but then needed to make a change, the ENTIRE profile would be installed again. Now, this normally wouldn't create a problem, but, where Disk access, etc, is being granted, this would prompt the end user several times (for each payload within the profile) rather than once   Hope that this helps   Kind regards,   Paul ... View more

Without further information, based on what you posted, it sounds like this customer is on per-device licensing and someone applied 2 licenses to the same switch, leaving them 1 license short, I've run across this on an AP deployment. I can't recall exactly what the screen looks like, but under device licensing it should show a qty 2 on the switch using both licenses, just edit / remove 1 and it will free it back up and can be applied to the 3rd switch. ... View more

It goes with comment made by @Roybotic The customer is a Cisco Controller Based Wireless / DNA Customer and did not want to deploy a Meraki AP to pair the sensor with so they used the camera.   ... View more