My Switch core use this config: ip dhcp pool WIFI-AP-MERAKI network 10.1.1.0 255.255.255.0 default-router 10.1.1.10 dns-server 8.8.8.8 208.67.220.220 208.67.220.222 ! interface Vlan8 description ## VLAN AP-MERAKI ## ip address 10.1.1.10 255.255.255.0 ! ------------------------------------------ My access-switch(AP port) use this: interface GigabitEthernet1/0/10 storm-control broadcast level 10 storm-control multicast level 10 port security max 10 port security mode max-addresses port security discard trap 60 spanning-tree portfast spanning-tree bpduguard enable switchport access vlan 8 no macro auto persistent no macro auto smartport   My core is connected with all other switches, doing the distribution of this DHCP.   I've always used the AP without vlan and only with DHCP seted, it works fine. Due to an error I put vlan = 8 on the AP, losing total connection... you are suggesting that, I put the PORT as trunk for use of the native vlan?   ... View more

Now, the AP is offline again.   Switch port config. to AP: interface GigabitEthernet1/0/10 storm-control broadcast level 10 storm-control multicast level 10 port security max 10 port security mode max-addresses port security discard trap 60 spanning-tree portfast spanning-tree bpduguard enable switchport access vlan 8 no macro auto persistent no macro auto smartport   I applied the wrong VLAN on the AP, by meraki dashboard. I believe that only a reset will solve this.   Ty Nolan ... View more

Sup Nolan,    I did this, now the AP has changed to "good repeater".   Ty  ... View more