@Bruce  Okies, I will try to setup Radius Server and integrate NPS with AD, Will let you know for update of any help required.   ... View more

@Bruce Thanks for clear explanation.   I just want to achieve below, please help me with your experience.   Customer used to login with there AD credentials to laptop for windows login and then try again to connect wth SSID which redirect to splash page for Domain name as password which is perfect working fine with MR and AD Auth.   But now customer need to achieve, once customer login with windows login with AD credentials its auto connect with Corporate  SSID, is there any change i have to do in MR, or AD Group policy or any Script can work?   Is there any way to achieve this and any suggestions would be great help? ... View more

I have heard but not sure, please put some light.   Between MR and Radius Server Authentication or you can say first Handshake between MR and Radius server is in open text ? Any confirmation or Link to refer? ... View more

Very Valid point raised. ... View more

@KarstenI  Thanks Mate. @Bruce , I have 2 Link with different bandwidth, I want to use WAN 2 for YouTube and Facebook or other non critical application .   Is there any way to achieve like putting Facebook and Youtube on WAN 2 ? ... View more

@PhilipDAth  Thanks for Link.   Can I achieve same Radius Auth with Aruba Clear Pass? ... View more

@KarstenI  I do agree with you.   But i can see all my MX has different MX higher limit under uplink, does it Auto sense from ISP and set its higher limit same as ISP commitment? ... View more

@KarstenI  I got something under Security-SD-Wan under Traffic sharing, there   you find to shape traffic, there is higher limit under uplink configuration, I think that is the max limit which is ISP is giving?   Could u correct and cross check, is my understanding is correct?   ... View more

Got it, only ways is Wireshark! ... View more

@KarstenI  Thnaks,   yes ,   I have done speed test and utilization, it only show current scenario, but didn't get what is signed and commitment from ISP.     ... View more

@KarstenI  Thanks.   One quick question, is there any way we can see what is my uplink Bandwith ?     ... View more

@UCcert  IS there any way on meraki MS we can see Voice Vlan traffic is bee n marked? ... View more

Thanks,   if IP Phone is connect with HP switch and HP Switch is connected with Meraki MX  or MS, do required any configuration on HP switch global or Interface level for Qos? ... View more

@UCcert  Thanks Mate.   Just follow your shared link and enable QoS of my Cisco IP Phones VLAN.   Do other vendor IP Phones mark DSCP marking same like Cisco IP Phones Do bydefault? In my Voice Vlan I have cisco and other vendor phones also, now this will trust other vendor IP Phones also?   I have multiple sites Voice environment, connected with MX SD-WAN over Broadband Fiber.   ... View more

Mates,   Need suggestion?   I have coupe of MR at sites and having guest coming with iPhone, Ipad and other android device,  What will be best way for Guest User Authentication ?     ... View more

@PhilipDAth  Thanks for Link.   Is there any way we can achive AD Auth with Windows login with Any Group policy or script? ... View more

@PhilipDAth  Thanks for your response.   Link you have shared is for WPA2-Enterprise with Meraki authentication, which require every-time to create user credentials on Meraki Dashboard.   I want my user to get it authenticated with AD, but wireless Corporate SSID on there laptop get  connect at same time once they login with there windows login AD credentials. ... View more

@PhilipDAth  Thanks.   one more thing..   Do i need to allow UDP500 UDP/4500 and IP 50 (ESP) under meraki vMX dashboard?   or in Azure, if yes, where exactly in Azure? ... View more

@PhilipDAth    Need your expert advice on Meraki vMX.   I had vMx running on old azure subscription and everything was Ok from Azure and meraki daskboard, due to some reason i need to shutdown my old azure subscription so i deleted vmx from old azure and created on new Azure CSP subscription.   now i can see everything is fine on azure side, i can see public n static ip also in azure and can ping public Ip from internet, but i m not getting IP and sysn with meraki dashboard.   Please help and suggest? ... View more

@cmr    Thanks Mate, I have added option 150 and its work for me and IP Phones get registered with CUCM.   Do I need to add Option TFTP (66) also  or what would be ideal scenario of adding it ? ... View more

@cmr  Thanks Mate for your kind support as always.   Sure, I will start new Thread now on MR, I have few query on that and mark this as a resolved.   Appreciate your Knowledge on Meraki.       ... View more

from below output, I understand that i have more license in Organization assigned as compare to what we are consuming and assign in Network devices correct?   If this understanding is correct, what would be the reason?   Faulty Hardware?  more license as compare to Hardware or something ?     License Limit Current Device Count Wireless AP 200 180 ... View more