Meraki

MauH · ‎Dec 7 2017

Interesting, if you end up giving this a try please let me know if it worked. If I can get some of this cast devices I will give it a try myself.

MauH · ‎Dec 7 2017

@BeachBum, Blog post Link fixed! Thanks for the feedback.

MauH · ‎Dec 7 2017

Thanks @BeachBum, I changed the URL link on this post. Should be loading now. I'll have our Marketing team check the blog post today.

MauH · ‎Dec 6 2017

@BillV Ill bring this up tomorrow with our Dashboard team.

MauH · ‎Dec 6 2017

Dashboard's overview page could be your one stop shop to find devices that are online/offline/alerting. Just go over Organization -> Overview and select "Devices" tab. From here you can filter by device type, status or even filter by name.

MauH · ‎Dec 6 2017

Meraki MR kits now available! you can find more information here https://meraki.cisco.com/products/wireless/mount-kits

MauH · ‎Dec 6 2017

Now you can Bulk edit radio settings on your APs! Head over to Wireless->Radio settings -> Click "View new version" This will make it easier for larger network with plenty Access points.

MauH · ‎Dec 6 2017

Hi @Uberseehandel, Depending on the type of casting device you use there will be a limitation from where you can cast. As far as I know Chromecast wont let you cast if they are on separate VLANs (different broadcast domain).

MauH · ‎Dec 6 2017

Want to find out how your MX is performing? Make sure you are running our latest beta and find out under Organization -> Summary report and select "View new version".

MauH · ‎Dec 6 2017

Probably you've seen this tab and clicked once or twice.... Under Wireless -> Access points -> select an AP -> click on RF this will display historical utilization over the channels in use. This can be very helpful if you are having bad wireless connections at specific times during the day. Below you can see a screenshot from my AP at home. You can specify either 2.4 or 5Ghz channels or even view live data from the second dropdown. Between 6-7PM we can see a big spike on 802.11 traffic near this AP. Share below if you've used this tool before and how it helped!

MauH · ‎Aug 30 2017

Hi @Mountainbikert, If the undo button @PhilipDAth mentioned is not there please call our Support line and they will be able to move the license for you now that you are an org. admin on both dashboards.

MauH · ‎Aug 29 2017

You are welcome @cisco_Meraki if my reply answered your question please feel free to mark as solution for the thread Thank you!

MauH · ‎Aug 28 2017

Hi @cisco_Meraki, Z1's wont be able to do Advanced security features. You can get Enterprise license (for the Z1 only) and add it to the same organization.

MauH · ‎Aug 25 2017

Hi @12ax7, Can you explain a little more of your setup? global setting is set to use WAN1 as primary uplink and using shaping for VoIP priority? This far traffic should not be affected to use a different uplink. Do you have load balancing enabled?

MauH · ‎Aug 24 2017

Hi @PentagonSystems, Here you can find more information about how templates work and setup unique subnets for each network > https://documentation.meraki.com/zGeneral_Administration/Templates_and_Config_Sync/Managing_Multiple_Networks_with_Configuration_Templates

MauH · ‎Aug 24 2017

Hi @MWRD, Please refer to this article on how to create a group policy and then apply it to your amazon echo > https://documentation.meraki.com/MX-Z/Group_Policies_and_Blacklisting/Creating_and_Applying_Group_Policies

MauH · ‎Aug 24 2017

Hi @paul1923, Traffic analytics can report specific hostnames once enabled on each network underNetwork-wide > General and set "Hostname Visibility" to "Report specific hostnames". This feature allows you to show traffic for two hours, one day, one week and up to one month and can be exported to a csv file. Here you can find more information > https://documentation.meraki.com/MS/Monitoring_and_Reporting/Switch_Traffic_Analytics

MauH · ‎Aug 10 2017

@AjayG wrote: I recently deployed a new network and cannot see the Topology menu under Network-wide. Hi @AjayG, Are you using any Meraki switch on your network? The Topology page (menu) will appear on your dashboard once you introduce a Meraki MS into your network. Here you can find more information -> https://documentation.meraki.com/MS/Monitoring_and_Reporting/Network_Topology

MauH · ‎Aug 9 2017

Hi @Wednesday, Zoom level will need to be set during/after camera install as @MerakiJockey505 mentioned, once this is set the camera will start recording at the level of zoom selected. If you require to zoom on existing video you will need to export first and use your preffered video editing tool to zoom in the video.

MauH · ‎Aug 9 2017

Hi @SamuelS, You can have up to 12 cameras per video wall. There is no limit on how many cameras you can add to your network. Here you can find more information on how to create a video wall -> https://documentation.meraki.com/MV/Other_Topics/Video_Wall

Meraki

Community

About MauH

MauH

Community Record

Badges

Re: Secure 'Casting

Re: New MR mounting kits!

Re: New MR mounting kits!

Re: CPU load on your MX!

Leverage Overview page to find online/offline/alerting devices

New MR mounting kits!

New Radio Settings page (beta)

Re: Secure 'Casting

CPU utilization on your MX!

Leverage RF tool to tshoot/monitor interference

Re: Move devices between organisations

Re: MERAKI Z1

Re: MERAKI Z1

Re: Meraki MX100 SIP and Dual WAN

Re: Teleworker template - unique addressing for each site

Re: Group Policy

Re: Traffic Analytics to database

Re: Why can't I see the topology page on my new Dashboard?

Re: Can we zoom in on video footage?

Re: How many cameras can be added to a video wall?

Re: Why can't I see the topology page on my new Dashboard?

Re: How many cameras can be added to a video wall?

CPU utilization on your MX!

Re: MERAKI Z1

Re: Why can't I see the topology page on my new Dashboard?

Re: How many cameras can be added to a video wall?

New Radio Settings page (beta)