My team and I have been on-boarding 9200 and 9300 stacks for a client and per their request, they are wanting them brought into the Meraki dashboard under the hybrid mode. So far all the 9300 stacks we've deployed have run smooth. From configs to bringing them into the Meraki dashboard and the tunnels staying up while the on-boarding process happens. We can launch the CLI and run commands through the dashboard without any issues. However, with that said, the 9200's are the devil. They are configured identically to the 9300's and for the past 3 weeks and about a 100 emails back and fourth with Meraki and Cisco, no one can explain why the 9200's will not populate in the dashboard. Even better, The dashboard says they are online, but the local ip address for this stack are wrong and the gateway doesnt exist, but if I launch the terminal (even though I shouldn't be able too because they haven't connected to the dashboard) I can do a "Show Run" command and low and behold the correct config with ip address and routes are on the switch. I've removed and added this stack back 3 time per Meraki/Cisco tech's and so far nothing has worked. This stack is in a production environment and has been since we deployed it, but its never communicated with the Dashboard, but like I said earlier the 9300 stacks have never had an issue communicating. Any thoughts?
... View more