Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About bluemoon61
bluemoon61
Here to help
Member since Oct 31, 2018
Jul 30 2024
Community Record
19
Posts
4
Kudos
0
Solutions
Badges
Jul 30 2024
1:06 AM
Funny you should ask but yes....I was working on replacing some lights and at some point there was a short that tripped out a main breaker and I had to reset it Honestly speaking that is not the first time we have had a short like that in the house and in the past the MS has handled it gracefully but not this time
... View more
Jul 29 2024
8:45 AM
4 Kudos
bunch of DAI failures been diagnosed as PoE controller failure in the MS RMA on the way
... View more
Jul 29 2024
4:02 AM
I have a small home network. MX64 / MS120 / 4 APs: MR33/20s - all in gateway mode All APs have simultaneously lost PoE (no lights on any of them) Switch is up and other wired ports are up I just power cycled the MS that all of the MRs are homed to and one of the AP ports appears to have come up from the switch side but there is no status light on the AP in question
... View more
Nov 30 2020
1:34 AM
Thanks for the suggestion - can I ask why this is a better approach ? Just trying to understand ?
... View more
Nov 26 2020
2:30 AM
Searching wider this looks like it will block QUIC which does not strike me as a major issue because she is on an iPad and mainly using Safari and because her Chrome can still fall back to HTTP/HTTPS but am I missing anything else ? All of the apps that she is supposed to be using from the iPad are Google Classroom based but I don't imagine these need QUIC ?
... View more
Nov 26 2020
2:17 AM
Meraki have just suggested that we also need to block UDP 443 so added a rule for this too
... View more
Nov 24 2020
9:20 AM
Just tried and no dice - Instagram and Facebook still loaded on a device that was supposed to be restricted
... View more
Nov 24 2020
6:43 AM
Honestly not but can try that later when I am no longer working.....rebooting will take my business network down
... View more
Nov 24 2020
5:27 AM
Nov 24 2020
3:36 AM
Thanks and yes I realise that but the issue is that they do still work.....was not expecting to see them removed but was not expecting them to work
... View more
Nov 24 2020
1:08 AM
Hello - new to using the Meraki GP and probably doing something wrong but has anyone managed to successfully block social media from a device with Group Policies ? We have a teenage daughter who has "an addiction" and we are trying to stop the "addiction" interfering with homework time by blocking access on a device that should be being used for schoolwork. Apple Screentime has failed us too many times so we are now trying to use GPs. This is a set of L7 FW rules that I have added to a GP and applied that same GP to my iPad but I still see all 3 apps from my iPad Any ideas what I am missing ?
... View more
Feb 22 2019
1:27 AM
I am trying to enrol an iPhone in my Meraki console - it actually was enrolled at one time and then I noticed that it had somehow dropped off the enrolled devices...right now it shows as "Management Profile has been removed" If I try to enroll the device it gets stuck at this stage: If I look at the device settings I notice that there is no place where an MDM profile can go: On other devices it shoes up after iTunes Sync and VPN in the settings The phone is up to date in terms of iOS - 12.1.4
... View more
Feb 6 2019
4:35 AM
Thanks for the suggestion - honestly I have swapped cables ad infinitum I have actually just realised though that the Play:1 has associated with the home WiFi and works over that with no issue for now so I have pulled the ethernet cable and see what happens
... View more
Feb 5 2019
9:36 AM
This is the basic config I have been trying with my switch with RTSP toggled both on and off and in each case I have seen UDLD errors I do notice that your port is set to TRUNK where I have been using ACCESS
... View more
Feb 5 2019
6:26 AM
I am having no luck at all connecting a SONOS PLAY:1 to a port of my MS210-BLP Every port setting I have tried results in a UDLD error on the port and then loops and meltdown and the only state I can recover to means leaving the PLAY:1 off the wired network I have a SONOS controller connected to the same switch and following the advice I read here: https://en.community.sonos.com/troubleshooting-228999/sonos-and-the-spanning-tree-protocol-16973 I have enabled RTSP on the ports connecting to the SONOS CONTROLLER but it does not matter what I set to the PLAY:1 (RTSP ENABLED / DISABLED) still results in a UDLD error Any suggestions appreciated ?
... View more
Jan 13 2019
8:26 AM
Thanks for the great suggestions ! We do actually use a Group Policy to block access to the Chromebox already purely on a time basis and I had not spotted the L7 FW rules but your idea is perfect....for now !!! I know we are in a game of "whack a mole" with them but I can only try....it is absolutely impossible to watch their every move but as much care and attention we can apply "automatically" is worth a try. She has already figured out that she can get around a "spyware app" we openly run own her phone by switching off the wireless and mobile data on her phone (which stops the cloud based timers from running) and manages to "achieve" over 4 hours of "Screentime" on her phone each day when she is supposed to be policed to only 1.5.....so yes we know we have to "keep smart" if we can and I am trying to do that. What is about to happen is the broken cloud based policer is going to be replaced by Apple Screentime (which has only just started working for us). This means other "specials" are needed (like replacing Safari with Chrome because Apple does not block Safari at all ever but I figured out how to do that as well). The thng is as soon as the door closes on her "untracked" iPhone time I can see the Chromebox usage rising and it is obvious what will be the main sites she will hit....he already sits on TWITCH once his XBOX Fortnite time runs out if the Chromebox is open and we do not see what he is doing I think from reading your suggestions the reasons my attempt at a URL filter failed before may have been that I did not STOP / START my iMac after I created the rule but I will try your idea once nI am home next weekend Thanks again !
... View more
Jan 13 2019
5:39 AM
We are trying to create a filter to block access to some Social Media URLS from a specific device. Our kids spend way too much time on apps and whilst we can control access from iPhones and xBox we also have an open Chromebox that they can web surf on and it becomes the fallback point when Instagram and Fortnite are no longer reachable on iPhones and xBoxes ! It is time filtered so that they cannot access it outside certain hours but I would like to be able to stop them using it to watch Fortnite on TWITCH TV and access Instagram.com for example I would like to be able to filter these URLS without blocking the access to the actual Social Media app itself and ideally without blocking access to that URL from other devices on the network ? Is it possible to do any or all of the following ? 1. Block access to a URL without blocking the app itself (for example Instagram) 2. Block access to a URL from a specific device so that the site can still be accessed from other devices in the network ? I set filters with URLBlocking in Content Filtering but they are not working: - I can still access the supposedly blocked web site from my iMac. I tried the Meraki suggestions of clearing History / Cache in the browser and also made sure the iMac was not Whitelisted so those are not the issues ? Can this be done ?
... View more
© 2024 Cisco Systems, Inc.
