IDS/IPS is disabled. Running in routed mode. ... View more

Thank you for the insight. On the phone with Meraki support. We were seeing client IP conflict on uplink errors that relates the virtual WAN mac address potentially.    Jobs are running fine right now on our spare, wondering if there is an issue with the HA setup or the primary MX. ... View more

Seems to average around 75%. This was from last night. The previous MX250's would peak 100% and then fail over.   ... View more

The cable between the MXs and switches are CBL-TA-1M-AO ... View more

Thank you for responding. I took over this setup so I am still learning it. I went out to the data center. We actually have Cisco C9300NM-8X switches that the MXs are connected to via DAC. Then those switches have the uplink to the data center cross connects via SFP and fiber.   ISP has reviewed and stated no issues on their end. I will have to try and figure out how to determine if we are seeing packet loss between the switches when the traffic occurs.   I tried to open a ticket last night and they were not able to help out. I will need to try and call back in today.   I will review the MTU guide and see how we have that configured. ... View more

It peaks at around 4.1 Gbps but averages at about 2.8-3.2 Gbps. Routed mode, they are connected via DAC to Cisco C9300NM-8X switches. Then those switches have the uplink to the data center cross connects via SFP and fiber. Advanced security licenses. We have all the security features turned off. The services they are hitting are 1:1 NAT rules. It is a service, so we have our customers uploading data with about 400-700 jobs at a time between everyone.     ... View more

Thank you for responding. I took over this setup so I am still learning it. I went out to the data center. We actually have Cisco C9300NM-8X switches that the MXs are connected to via DAC. Then those switches have the uplink to the data center cross connects via SFP and fiber.   ISP has reviewed and stated no issues on their end. I will have to try and figure out how to determine if we are seeing packet loss between the switches when the traffic occurs. ... View more