Meraki

cgbenne42

After installing Wireshark and watching the traffic, I noticed a SSL/TLS error that lead me to the KB article below. It was the issue outlined in the article that directed me to a cert issue I had to fix. Active Directory Issue Resolution Guide - Cisco Meraki Documentation This one is good to go. @Mloraditch you sent me down the right path!

cgbenne42

I placed my laptop on the wireless VLAN and LDP works perfectly with the dedicated meraki account in AD. I'll see if the traffic is passing in Wireshark, but the initial testing with LDP shows a valid and successful connection.

cgbenne42

I've entered it correctly as indicated by the KB, shown in my screenshot above, but the AP keeps failing to connect.

cgbenne42

Hey all! I'm setting up a new deployment and cannot get the ldap working for a secured wireless network. I added an AD account to the top of the users OU and set it to the following in the LDAP Admin field; cn=meraki,dc=Users,dc=intra,dc=domain,dc=gov When I input the correct username and password for a test, I just hit the following error; I'm able to ping the internal DC address from the AP with no issues. Could somebody point me in the right direction for this one? -Chloe

Meraki

Community

About cgbenne42

cgbenne42

Community Record

Re: New install - LDAP Auth

Re: New install - LDAP Auth

Re: New install - LDAP Auth

New install - LDAP Auth

Re: New install - LDAP Auth