Meraki

Mat2018 · ‎Oct 30 2018

Hi there, We got reports from the customer that they also have the same issues with their laptops. Colleagues are thinking that the combination between old and new switches could be causing this issues. Customer left several Cisco Catalyst switches from 7 years old in use and it looks like the problems arise when a user roams from a Cisco Meraki switch to an old Cisco Catalyst switch ? Sounds this logical ?

Mat2018 · ‎Oct 27 2018

Hi there, Was looking at the wrong SSID, settings are: Dual band operation without band steering Minimum bitrate is 11 mbit 802.11r still enabled Thanks in advance.

Mat2018 · ‎Oct 27 2018

Hi there, Thanks for the quick reply. I had a look at the settings: 802.11r is enabled Minimum bitrate is 12 mbit We only have 5 GHz active on the SSID What would you propose ?

Mat2018 · ‎Oct 26 2018

Good morning, We have a brand new Cisco Meraki wireless lan setup with mr33 ap’s. Connected to this wireless network are a lot of devices, like Spectralink WiFi phones, windows laptops, but also samsung xcover 4 phones. Everything is working fine except the samsung xcover 4, at random times, random phones lose their connection. For worse is that they do not automatically regain connection, so user had to switch off/on wifi or phone and then it will work again. We know that there have been issues with samsung phones and wireless and implemented the latest version of samsung firmware which also has the wifi fixes. It looks like the problem has reduced, but sadly not completely. anybody an idea what could be the issue there ? thanks!

Meraki

Community

About Mat2018

Mat2018

Community Record

Re: Cisco MR33 and Samsung xcover 4

Re: Cisco MR33 and Samsung xcover 4

Re: Cisco MR33 and Samsung xcover 4

Cisco MR33 and Samsung xcover 4