Community Record
6
Posts
0
Kudos
0
Solutions
Badges
Monday
Hello, when I use a Windows client I get the same error messages as in the dashboard. but now I was able to capture the corresponding logs via the dashboard and see that the RADIUS request is made with the error: Duplicate Request from Client to Server. I then get the same message from the server to the client (MR57). This is probably a timing problem, but I don't know where I can set this on the Freeradius. I Use EAP-TLS Translated with DeepL.com (free version)
... View more
Monday
Hello, sorry for the late reply, but now I was able to capture the corresponding logs via the dashboard and see that the RADIUS request is made with the error: Duplicate Request from Client to Server. I then get the same message from the server to the client (MR57). This is probably a timing problem, but I don't know where I can set this on the Freeradius. Does anyone have such problems and how could they be solved? Translated with DeepL.com (free version)
... View more
a week ago
Hello, At our school, it is the projectors that broadcast this ID Since we use the Miracast function of the projectors. At the beginning, our devices that are in our WLAN could not connect to it and I have entered a corresponding exception rule that everything with the SSID “DIRECT-*” Meraki is allowed. I only stumbled across this after I used a device that is not integrated in our WLAN.
... View more
a week ago
Hello, At our school, it is the projectors that broadcast this ID Since we use the Miracast function of the projectors. At the beginning, our devices that are in our WLAN could not connect to it and I have entered a corresponding exception rule that everything with the SSID “DIRECT-*” Meraki is allowed. I only stumbled across this after I used a device that is not integrated in our WLAN.
... View more
a week ago
Good morning, First of all, thanks for the relevant information and sorry that I'm only getting back to you now as I have too many things to do at the moment. Unfortunately, Wireshark does not currently work via the dashboard. To 1 The Freeradius is in the same network as the access point and the port is also enabled. To 2 Not applicable as the radius and AP are in the same network To 3 and 4 I'll have another look today as I didn't know the link until now. To 5 All clients are entered accordingly Re 6 When testing via the dashboard, there is just this error message. Completed testing connectivity to RADIUS server at xx.xx.xx.xx:1812 Authentication failed while testing on one of your access points. This means the RADIUS server was reached but your credentials were incorrect. The test was stopped to prevent this account from being locked out due to multiple failed attempts. Please try again with different username and/or password." So the connection between the APs and the RAdius looks good in the dashboard. The user name and password are also requested on the client. Then I have to enter a password again, which makes me a bit nervous. Regarding the other points I will also work through them again today. Translated with DeepL.com (free version)
... View more
a week ago
Hello, We operate a local AD with an NPS for the Meraki AP'S, which also works so far for all users. Now we want to split the whole thing into 4 SSIDs, i.e. only certain users are allowed to log on to the corresponding SSID. For this we want to switch from NPS to Freeradius 3.0 under ubuntu Server 24.04. The installation itself works without any problems, which I can check with the NTRadPing tool. However, as soon as I integrate the radius in the dashboard, I get the message that the radius is accessible, but the login data is not correct. Messagetext. "Authentication failed while testing on one of your access points. This means the RADIUS server was reached but your credentials were incorrect. The test was stopped to prevent this account from being locked out due to multiple failed attempts. Please try again with different username and/or password." But the User and the Password are correct. I have already copied the corresponding configuration from https://documentation.meraki.com/MR/Encryption_and_Authentication/Freeradius%3A_Configure_freeradius_to_work_with_EAP-TLS_authentication , but unfortunately without success. Is anyone familiar with this issue and knows where I can start? Translated with DeepL.com (free version)
... View more
