I guess I should clarify, using mine as a simple gateway/firewall. No features enabled other than some content filtering, for guest networks etc. So no VPN/IDS/IPS/AMP etc. ... View more

It is for my 2960 stacks yes ... View more

I have several MX84's handling 500-1000 clients CPU utilization only ever goes to 25% Never had any noticeable issues ... View more

Are the AP's connected to trunk ports and are your pruning for only the SSID VLANs + mgmt VLAN on that trunk port? ... View more

Tagging some others on here since this is a great post and I'm sure will provide tons of info for others:   @PhilipDAth  @MerakiDave  @BrechtSchamp      I'll try my best at this, so please excuse any errors on my behalf. 1. Fraction of uplink is based on percent, meaning if you have 100Mbps circuit, you 'HAVE' to configure the uplink as 100 (you can't leave the default of say 500 or whatever it is, the max). It uses the configuration you set to ensure that the percent of bandwidth is available for the queue slots. My interpretation is that if LOW is 1/7 and its pushing more, it will essentially just drop it (if the rest is already being used), but if not then it will allow it to grow.   2. I believe it will expand if the other queue are not being used, and if all queues are full then it starts killing off LOW first, then Normal etc. At least that makes the most sense to me.   3. I yield the remainder of my time to my opponents =P   4. Correct, they will either honor or remark them as you have configured. Keep in mind Internet does not care what the marking is since you can't QoS Internet traffic.   5. Hmm...probably yielding more time to others but my best guess was it would apply for only AutoVPN destined traffic. So voice packets (EF) having higher priority over Background etc., when getting processed in the queue.   6 through 9: have a read here:   https://community.meraki.com/t5/Security-SD-WAN/QoS-over-VPN-tunnel/td-p/33078 https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Using_Packet_Prioritization_on_a_Traffic_Shaping_Rule   10. You mean your going to enable split-tunneling? ... View more

How are you connecting the Z3 to your network? You should be connecting the Internet/WAN port on the Z3 to your network and as long as it has Internet it should work. What firewall do you have at your house? If its a normal ISP/netgear/Arris type setup then I doubt its got anything going on that would be blocking your Z3. What are the LED colors showing you on the front? Connect to it with Ethernet cable and your PC/laptop and access its local status page and see what it shows http://setup.meraki.com ... View more

Oh and at home your far less likely to have lots of interference with neighbor networks like you would in the office, where everyone is blasting on 2.4GHz Which is why it works fine at home but not office My offices have the same issue which is why its 5GHz only for my wireless networks ^_^ ... View more

Awesome job! @DarrenOC  ... View more

Just upgraded mine at home and the one in my office lab, not sure if i'll notice any difference since i'm not using any fancy pants technology ... View more

It is supposed to do it without issue yes, since it is all apart of the same ORG. ... View more

Are you using any sort of AutoVPN by chance? Also check the wireless access control / firewall settings. Any AMP/IPS/IDS enabled? Layer 7 rules anywhere etc. ... View more

Unless your specifically blocking it with the MX or MR, it should work. Do you have firewall rules in place already? ... View more

Welcome to the forums Joe ! ... View more

@CN wrote: A couple of days ago we made some tweaks to the layout of the Client VPN page. Most of these changes are straightforward, just helping provide guidance on the different options that are available. Also some FAQs of what might be going wrong.    One thing that is really new is on the Network-wide > Clients page. I didn't realize it until someone pointed it out to me, so I thought I'd share. You can now filter for Client VPN connections.                  Thanks @CN  - there have been at least 3 or 4 posts in the last several days specifically asking for a better options on viewing Client VPN connections, due to the boom in people working from home etc.  Not sure if what you guys have updated helps yet but I think one of the issues was being able to easily 'see' failed client connections, where as now I think they have to dig through syslog. ... View more

Not sure what that is but quick Google on my side shows it just being an end-user device that needs Internet. Is it connecting via Wi-Fi I assume? Does your SSID have dual-band? Does the device support 5GHz etc. What model AP, what firmware version are your APs running? What do you have your minimum data rate set to on the Access-Control page? ... View more

Yikes ! ... View more

The limit is your imagination !     ... View more

Yes you can, just click the pencil icon and you can edit them. Sim, você pode, basta clicar no ícone de lápis e você pode editá-los. ... View more

Don't forget patch cables between switch and POE Injector etc. I've used some of the 'flat' ethernet cables at home because I thought they would look better, and after a few months I had several of them crap out and would only run at 100Mbps. Never buying those again ... View more

Being honest, your probably going to be the very first, and probably only (for a while to come). We would love for you to provide info and report back here on your adventure and how it goes with you etc. Keep us posted ! ... View more

Yeah mine is a little worn out too =P   ... View more

Sounds like then you'll have to contact Meraki support, if it does support it but its hidden (they have many of these hidden gems), then you will need to ask them and they can confirm/deny and if confirm, enable it for you 😃 ... View more