Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About TonyBoy
TonyBoy
Comes here often
Member since Sep 26, 2018
Oct 30 2018
Community Record
8
Posts
0
Kudos
0
Solutions
Badges
Oct 16 2018
10:49 AM
will be the MX, the Core is already configured pointing at the FW
... View more
Oct 16 2018
4:50 AM
Vlan 1 192.168.70.1 Default Vlan 2 192.168.71.1 Wireless Vlan 3 192.168.72.1 Cameras Vlan 4 192.168.73.1 Voice Vlan 5 User Vlan 6 Production Vlan 7 Firewall (ASA is living here) Vlan 10 Servers Cisco Core is using EIGRP router eigrp 100 network 192.168.76.0 network 192.168.253.0 network 192.168.254.0 redistribute connected passive-interface Vlan254 eigrp router-id 192.168.70.1 ! ip default-gateway 192.168.76.254
... View more
Oct 15 2018
1:38 PM
What's the best practice for the MX IP and VLAN, Lets say that my Cisco Core VLAN 1 is set to 192.168.70.1 How should I set the MX Name Default Subnet: 192.168.70.0/24 MX IP: 192.168.70.254 (or Any Available IP) VLAN ID 1 is ok to use same VLAN 1? Cisco switch interface GigabitEthernet1/0/36 description Uplink to FW switchport trunk encapsulation dot1q switchport trunk native vlan 1 switchport trunk allowed vlan 1,2 (I have a second vlan for testing) switchport mode trunk
... View more
Oct 11 2018
12:19 PM
This is my cisco config ------------------------------------------------------------- router eigrp 100 network 192.168.23.0 network 192.168.253.0 network 192.168.254.0 redistribute connected passive-interface Vlan254 eigrp router-id 192.168.16.1 ! ip default-gateway 192.168.23.254 ---------------------------------------------------------------
... View more
Oct 11 2018
12:05 PM
Now I have 10+ Vlans on my Cisco Core Do I need to create the same Vlans on the MX or they will be static routes or since the core will be directly connected to the MX there is no need
... View more
Oct 11 2018
11:50 AM
OK, lets say that the public IP from the ISP is 173.163.123.456 then General Public IP 173.163.123.456 WAN Status: IP (Static) 173.163.123.456 will be correct, thanks !!
... View more
Oct 11 2018
11:35 AM
Hi All, I am just starting in network and have a big task, migrate from Cisco ASA to Meraki MX84 here is my 1st question are public IP and wan supposed to be the same? or wan is my internal IP General Public IP 173.163.123.456 WAN Status: IP (Static) 173.163.123.456 OR my local firewall IP 192.168.123.456
... View more
© 2024 Cisco Systems, Inc.
