Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About MerakiAdminGE
MerakiAdminGE
Just browsing
Member since Feb 5, 2025
yesterday
Community Record
4
Posts
0
Kudos
0
Solutions
yesterday
Thank you very much! It works. I changed the uplink port from 48 to 1 and now the printer is reachable via ping and works.
... View more
Monday
Man if that's true, I'll send you a beer 😃 Last question. But why does the printer get its IP via DHCP when the uplink is not working? No matter, I will test port 1 as uplink on wednesday and will give an update 👍
... View more
Monday
The Current MS Switch version is MS 17.1.4 Interesting point. I will test it. Thank you. But that doesn't explain why I can ping the VLAN 1 gateway on the MX from the switch? It's just weird. I won't be back on site until Wednesday. I'll test it then. @Karsten I have set firewall rules that allow communication between Meraki Cloud (NAT mode) and internal.
... View more
Monday
Hi all, I have a very simple setup that doesn't work and I don't know why. MX250 with the following VLANS: VLAN 1 (Clients) Interface IP: 192.168.20.1 Uplink yes VPN mode yes VLAN 10(Server) Interface IP: 192.168.10.1 Uplink yes VPN mode yes VLAN 40 (Printer) Interface IP: 192.168.40.1 Uplink yes VPN mode yes DHCP is configured in MX250 for all networks. MS220 Switch has an IP from VLAN 1 (DHCP) The MS220 switch is connected via the MX250 port 3 (copper): Type: Trunk Native VLAN 1 Allowed VLAN: 1, 10, 40 (link is activ) MS220 Uplink Port 48 (copper) Type: Trunk Native VLAN default 1 Allowed VLANS: all (link is activ) RSTP: Enable STP guard: Disable UDLD: Enforce My printer is connected to the MS220 switch port 1 (link is activ) Type: Access Policy: Open VLAN: default - 1 RSTP: Disable STP: BPDU guard UDSL: Alert only PoE: Disable The printer receives an IP address from VLAN 1 (DHCP). My laptop is connected to the Wifi. Wifi is configured on the MX250. SSID runs in NAT mode: Use Meraki DHCP. Firewall & traffic shaping: Outbound rule configured with any any. The MR34 access points all have an IP address from VLAN 1 and connected to MX250. The Issue: The printer cannot be reached via ping. Not from my laptop (wifi), not from the switch, not from the MX. If I connect the printer directly to the MX250 (VLAN1), the ping works from my laptop. But not from the switch. Ping from laptop to Switch IP works. Ping from Laptop to Interface IP VLAN 1 IP works. Ping from Switch to Interface VLAN 1 IP works. I hope someone can help me. Thanks 🙂
... View more
© 2025 Cisco Systems, Inc.
