Meraki

Aysha · ‎Mar 14 2025

Thanks for your support.

Aysha · ‎Mar 14 2025

Hi Everyone, I have some concerns regarding an upcoming migration. I need to migrate Catalyst 9300 switches to the C9300X-24Y-M model. Currently, the Catalyst 9300 switches are serving as the backbone of the network and are configured as VTP servers. However, in Meraki, I don’t see any VTP configuration options. How to handle this situation without affecting the rest of the network. Also, generally, do you use dedicated interfaces specifically for uplink purposes and separate interfaces for connectivity with the data center (DC) firewall? Or do you use the same link for internet connectivity of the switch (to allow it to communicate with the Meraki dashboard) while configuring another interface as a trunk for the users behind the backbone?

Aysha · ‎Mar 7 2025

Dear team, We finally solved this dhcp issue by activating the features of vlan database and vlan profiles in early access, then configured the range of vlan we need on active vlans, and from there it seems that everything is working fine so far, we can even put a port in access 1213, we are observing since yesterday. Thank you all for your feedback and help.

Aysha · ‎Mar 5 2025

Hi Alex, Thank you for your reply, i don't have the active vlans option, and in the interface configuration i don't have any dropdown menu. At the beginning i saw that some features are not working for the catalyst-M switches so i thought it was my case, but now i'm little bit confused. Find attached the screenshots.

Aysha · ‎Mar 5 2025

I tried to put the port in different vlan but it was the same issue all the time. As mentionned in One of my replies, when I changed the vlan Id of the the vlan 1213 to 100, the dhcp assignment is working fine. And when I want to put a port in access to the vlan 1213 I have errors as you can see below. Regarding the upstream port it is now configured in access, but before it was in trunk vlan 1 because it’s just connected to an independent network which can give access to the internet different from the network of the customer.

Aysha · ‎Mar 5 2025

Hi, no rules blocking icmp actually. But I was wondering to know if ever there were some issues with vlan IDs greater then 1000, because when I changed the vlan Id, of the the vlan 1213 to 100, the dhcp assignment is working fine. And when I want to put a port in access to the vlan 1213 I have errors as you can see below. But I red somewhere that the issue can be in the management vlan side… This is my first in Meraki but I’m already missing CLI lol.

Aysha · ‎Mar 4 2025

If i configure manually 2 endpoints in the same vlan, they can ping each other but they cannot ping their svi.

Aysha · ‎Mar 4 2025

thanks, already done

Aysha · ‎Mar 4 2025

Hi Everyone, I'm encountering some issues with my C9300X-24Y-M switch. When we configure a port in access mode, the endpoint connected to that port does not receive an address from the DHCP server configured on the Meraki dashboard. Instead, it receives an IP address from the network where the uplink (the port providing internet access for communication with the dashboard) is connected. We have tried configuring the uplink port as both access and trunk, but the issue persists. Additionally, we are fully compliant with licensing requirements. Any insights or suggestions would be appreciated.

Meraki

Community

About Aysha

Aysha

Community Record

Badges

Re: VTP Domain in Meraki Switch -- Uplink

VTP Domain in Meraki Switch -- Uplink

Re: DHCP server not fonction with Meraki C9300X-24Y-M

Re: DHCP server not fonction with Meraki C9300X-24Y-M

Re: DHCP server not fonction with Meraki C9300X-24Y-M

Re: DHCP server not fonction with Meraki C9300X-24Y-M

Re: DHCP server not fonction with Meraki C9300X-24Y-M

Re: DHCP server not fonction with Meraki C9300X-24Y-M

DHCP server not fonction with Meraki C9300X-24Y-M

Re: DHCP server not fonction with Meraki C9300X-24Y-M