Meraki

TimBrown

so, i turned off the client balancing on the radio default indoor profile. The error code 17 went away almost completely. The association error code 30's are still all over the place. not sure if the 17s went away or just changed to 30s. no user feedback yet.

TimBrown

I will try turning off the client balancing and see if the errors at least decrease. will come back and post if it helps or not.

TimBrown

Users are starting to complain. newly occupied building, getting lots of these failures: auth_mode='wpa3-802.1x' 11k='1' 11v='1' error_code='17' radio='1' vap='2' channel='157' rssi='24' auth_mode='wpa3-802.1x' 11k='1' 11v='1' reassoc='1' error_code='30' radio='0' vap='2' channel='11' rssi='61' all windows clients, plenty of APs, so why error code 17 (Association denied because AP unable to handle additional associated stations)

Meraki

Community

About TimBrown

TimBrown

Community Record

Re: lots of Association failures, error codes 17 and 30

Re: lots of Association failures, error codes 17 and 30

lots of Association failures, error codes 17 and 30

Re: lots of Association failures, error codes 17 and 30

Re: lots of Association failures, error codes 17 and 30