So, the access point that connects to the switch I swapped out no longer has the error on it. Whether that was due to it being off for the duration of the swap out (about 30 minutes) like some other posts have menitoned or the new switch it is hard to say but that's one less AP with the problem. I am going to try and find another affected AP that I can take down for about 30 miniutes today to see if it clears the issue. ... View more

Currently we hjave a HP 2530 48 port switch being replaced with an Aruba 2930F. The current one isn't POE so we are using injectors for that AP. ... View more

Yep, really is! I am actually replacing one of the switches tonight with a new Aruba switch so will be interesting to see if that fixes the issue with that affected AP. ... View more

I tried that with one of my APs, come back up with no error then it reappeared after about 30 minutes so keen to know if the errors re-appear for you. Such a strange issue! Waiting for Meraki to come back to me with some advice. ... View more

No, I did firmware updates after the issue occured to see if that helped so rolling back those this morning and no others show over the last 30 days. ... View more

I also started getting those errors on 16 access points acros a 52 acre site. The issue is affecting APs on different swiches in different locations, on two completely seperate physical networks. All got the error at exactly the same time (13th November at 11:01).   Strangely, some access points on the same switches do not have this error. I am unable to find a pattern. Restarted switches, access points, cycle POE ports but nothing seems to resolve it. This is the only post I have found recently and seems strange to be affecting different organisations. ... View more