Meraki

Jamesfromit

Not even working for a single device, ring fenced testing to a single device

Jamesfromit

Yes the Meraki AP is authroised via the wired port based on its mac, then we need to do 802.1x auth for wireless clients connected to the Meraki AP. Switches are Dell N series Port config as below storm-control broadcast level 10 storm-control multicast level 10 description "***AP***" spanning-tree portfast switchport mode trunk switchport trunk native vlan 20 switchport trunk allowed vlan 20,25 authentication host-mode multi-auth authentication max-users 10 authentication periodic dot1x timeout tx-period 120 dot1x timeout server-timeout 60 mab authentication order mab dot1x

Jamesfromit

Yes AP was working fine with all current SSID's and the test one - i.e. clients being authorised and getting IP's. Since chnaging to auth the AP MAC agaist OPSWAT client fail to get an IP

Jamesfromit

We are implimenting a OPSWAT NAC to secure our wired and wireless network (Wireless moving from Windows RADUIS) We have set up a test SSID and have been able to authorise clients sucessfully and they get the assigned vlan in the group policy assigned. The issue we have now that we have added a test meraki AP (MR44) to be quthenericated at a MAC level to OPSWAT, which is sucessful but when client connect tpo the SSID on this AP they no longer get an IP, sucessful EAP auth but no IP. Port the Ap is connected to is a trunk and all the vlans are allowed am i missing something ?

Meraki

Community

About Jamesfromit

Jamesfromit

Community Record

Re: NAC authenticated Meraki AP - Wireless clients not getting an IP addres...

Re: NAC authenticated Meraki AP - Wireless clients not getting an IP addres...

Re: NAC authenticated Meraki AP - Wireless clients not getting an IP addres...

NAC authenticated Meraki AP - Wireless clients not getting an IP address