The problem is I don't know the IP address.  This is a management port on a Cisco UCS server... I have even connected a cross over cable to a WIN 11 PC that has wireshark on it to no avail.     I truly wish Meraki would show the IP of the connected host per port on the MS series switches.  It would simplify a TON.   I cannot reboot my server since I cannot get into the device to get to the CIMC to change the BIOS so I can boot from the DVD.  These UCS were a failed effort from Cisco since they lost their minds ignoring a true BIOS boot.  I have NEVER had a server that completely passes the CMOS screen at boot.  It goes from Hardware check to the OS.  Completely out of the Norm.. and of course I cannot get any help with that or these packet captures where I can get the ARP data of a possible IP address.   ... View more

Is there a list of filter expressions we can use?  I am trying to get IP address from the management port of my server (port 21) on my MS-220-24P switch.  I need to get this IP so I can get in there with a cross over cable to change it so I can get into the BIOS... but I cannot get the IP address from the port and I was told I need filter expressions but I cannot find the proper syntax for that.   Any help would be appreciated.     BTW my servers is a Cisco UCS C200 M2 that I cannot get a single bit of Cisco support for since it is too old I guess.  My F8 BIOS does not work, the KVM console cable does not work and I don't have the IP for the CIMC.  So getting this IP will be so important! ... View more