Hello Meraki Community,   We're experiencing a recurring issue with our MX95 that I’m hoping someone can shed light on. Setup Overview: • MX95 connected via WAN 1 to a multi-gig port on our ISP-provided cable modem. • WAN 2 is connected to the same modem via a 1 Gbps port as a backup. Issue Description: Periodically, the WAN 1 connection drops completely. During these outages: • The MX95 remains powered but loses internet connectivity. • After 8 hours, the MX95 reboots on its own and the connection is restored. • Alternatively, manually power cycling either the MX95 or the cable modem immediately restores connectivity. • Firmware has been updated to the latest stable and also the stable canidate.  Additional Notes: • The ISP modem has already been replaced, ruling out hardware failure on that end. • When WAN 2 is active (1 Gbps port), it remains stable and does not experience the same dropouts. • The issue appears isolated to WAN 1 when connected to the multi-gig port. Has anyone encountered similar behavior with the MX95 or multi-gig WAN ports? Could this be a firmware issue, port negotiation problem, or something else entirely? Any insights or suggestions would be greatly appreciated. Best regards, CP   ... View more