Meraki

tim_k

Hi everyone, sorry for responding late as I have been off for some days. My suspicion was that printer goes to sleep, hence changing also the speed link from 1Gbps to 10Mbps. The thing is that I manage the the firewall and the switch remotely, so will need to send someone to check the Printer to be sure. There is someone else managing the infrastructure internally. Thanks for all the feedback, most probably this is due to printer going in sleep mode.

tim_k · ‎Oct 8 2024

Hello everyone, hope you’re all doing well. I am receiving the "Port not forwarding traffic due to access policy" alert from time to time on my Meraki Switch (MS130-48P, is updated to latest stable Firmware). So, I have configured a port on Switch for our Print Server and it is working properly, but from time to time it is giving me the mentioned alert. When receiving the alert I'm not seeing any impact on the Printer. Port is configured as Access Port with Access Policy enabled to allow a specific MAC (Printer's MAC address, se screenshot). Tried with Meraki Support but no luck, also did a research but found nothing helpful. Has anyone encountered a similar problem or what could be the issue? Thanks in advance.

Meraki

Community

About tim_k

tim_k

Hashim Krasniqi

Community Record

Badges

Re: Port not forwarding traffic due to access policy

Port not forwarding traffic due to access policy

Re: Port not forwarding traffic due to access policy