Meraki

BillyLee · ‎Jul 10 2024

Hi Just provide update, it seems Meraki Engineer need to set the parameter for APs for the maximum packet length to unlimited or larger number in order to fix this issue and the UDP Multicast channel issue. Best regards,

BillyLee · ‎Jul 4 2024

Sorry for the delay response, yes, it's configured as L2 bridging. Thank you !

BillyLee · ‎Jul 1 2024

Hi. I can capture it on the client when connected with wire. I cannot caoture it on the client when it's connect through wireless, but Meraki tech can capture the pakcet is delivery down to AP, but didn't pass to the wireless client. Best regards,

BillyLee · ‎Jul 1 2024

Hi, Recently handle a project realted with mDNS(Bonjour) transfer. It's same VLAN #1 mDNS packet from wireless client to multicast address can be captured on wired server. #2 mDNS oacket from wired server cannot be captured on wireless client, but on the AP wireless connected can see that. Current version: MR 30.5 Bonjour forwarding is enabled and set to same VLAN 1000 for all services. Any idea or configuration might need to check ? Thank you. Best regards, Billy Lee

Meraki

Community

About BillyLee

BillyLee

Community Record

Badges

Re: mDNS send from wireless client to wired server works, but server to wir...

Re: mDNS send from wireless client to wired server works, but server to wir...

Re: mDNS send from wireless client to wired server works, but server to wir...

mDNS send from wireless client to wired server works, but server to wireles...