About ESonemann

ESonemann · ‎12-23-2022

Thanks Taylor. Is it possible to also monitor the bandwidth inside the VPN tunnel via API?

ESonemann · ‎12-22-2022

Hi people. Please, help me. is there any way to monitor via API, the bandwidth that consumes the VPN? I noticed that inside the dashboard, in the security tab and sd-wan - VPN status, there is this. But it would need APIs. It´s possible?

ESonemann · ‎12-22-2022

Tranks Taylor. this example above I would have in wan 1 sent: 118890582/(300*125000) = 3.17 Mbps. Is my calculation correct? Could you tell me, please, where did the value 125000 come from?

ESonemann · ‎12-22-2022

Hi Sungod. Thank you! Can you tell me how I get to the bandwidth usage calculation with this API https://developer.cisco.com/meraki/api-v1/#!get-network-appliance-uplinks-usage-history ? In this case I have to add the bytes sent + those received and divide by time? would that give the average bandwidth consumption within those 60 seconds?

ESonemann · ‎12-07-2022

Hi Guys. Please, help me? 1.3.6.1.2.1.2.2.1.10.1 - Is the INPUT bandwidth consumption per second on wan 1 on meraki 68? 1.3.6.1.2.1.2.2.1.10.2 - Is the INPUT bandwidth consumption per second on wan 2 on meraki 68? 1.3.6.1.2.1.2.2.1.16.1 - Is the OUTPUT bandwidth consumption per second on wan 1 on meraki 68? 1.3.6.1.2.1.2.2.1.16.2 - Is the OUTPUT bandwidth consumption per second on wan 2 on meraki 68?

ESonemann · ‎12-07-2022

Thanks Sungod. Do I need to enable early access for an organization? https://developer.cisco.com/meraki/api-v1/#!get-organization-appliance-uplinks-usage-by-network

ESonemann · ‎12-07-2022

hello Meraki community. Can you help me? I need to monitor the download and upload bandwidth of each WAN link via API. I am still looking for an API that show bandwidth utilization on the MX WAN ports. can you let me know if this is possible?

ESonemann · ‎11-19-2018

Hello, I need to deploy VMx100 in Azure CSP portal(without marketplace), I know that is not available in this Azure portal, but I try Meraki workaround in the link: However , not work. Has anyone ever worked with this template and made it work?

ESonemann

Community Record

Badges

Re: Is it possible to monitor bandwidth on Wan 1 and 2 via API?

Is it possible to monitor bandwidth on VPN status via API?

Re: Is it possible to monitor bandwidth on Wan 1 and 2 via API?

Re: Is it possible to monitor bandwidth on Wan 1 and 2 via API?

Re: Bandwidth monitoring with SNMP (WAN interfaces)

Re: Is it possible to monitor bandwidth on Wan 1 and 2 via API?

Is it possible to monitor bandwidth on Wan 1 and 2 via API?

VMX100 in Azure CSP