I hope someone finds this useful.  This is something that's been making us (well, me) crazy for several years.   We sometimes have an iPad with this same issue, it can't retrieve the configuration from Meraki and we're stuck.  Our licenses are up to date and most of our iPads work fine.  Here's what I had to do to solve this issue on the iPad I've been working on much of this week.    I wrote an internal wiki for our department and thought I should share it.   IPAD WILL NOT CONNECT TO MERAKI TO LOAD CONFIGURATION   Sometimes during re-imaging of Meraki MDM managed iPads the iPad will not be able to progress past the point of retrieving its device management policy and the following message will appear on the iPad screen:   The configuration for your iPad could not be downloaded.  The configuration is not available.   Re-imaging the iPad and starting over will always display this message.   To proceed past this error message the iPad has to be unenrolled from Apple DEP and from Meraki DEP, in that order.   Log on to the Apple DEP page.  I omitted the link since it could change int he future.     Click on Get Started to the right of Device Enrollment Program Select Manage Devices from the Menu on the left Be sure the Serial Number radio button is selected and enter the serial number of the iPad. Under Choose an Action select Unassign Devices. Click the OK button.   Log on to the Meraki MDM management page:     Highlight System Manager on the left and select DEP from the center column of the pop up menu. Click on the Full sync button on the upper right corner. Wait at least an hour, this could take time.   After at least an hour, it could be less but the time required seems pretty random, go back to the DEP menu in Meraki, and search for the iPad by name, if it’s still there, hit Full sync again and wait some more.  The device will eventually disappear from Meraki DEP.   Once this is done, plug the iPad in to a computer with iTunes installed, then hold the power and home buttons in until the datalink icon appears on the iPad’s screen.   Run iTunes and do a restore/update on the device and follow the instructions.   Once the iPad has completed the restore unplug it from the computer and set the device up as a new device.   I now have the iPad working again.   Now I need to re-enroll the iPad I've been working on.  I hope it works.   ... View more