Hi, As regards the following item: In rare cases, MX67C, MX68CW, and Z3C appliances may fail to enter into a "Ready" state despite being able to register to a cellular network and obtain an IP address for the modem. Seems it may also need to include Z4C's as well, as seems to have been allocated IPv4 and IPv6 addresses, but not showing as Ready: Seems to be up, but not really 100% sure. ... View more

Painful.  Could you use AutoVPN instead of accessing the cameras via NAT? ... View more

I change the firmware to .3 and the issue got resolve. However, I'm currently having different issue with the current firmware.  ... View more

As per the Legacy products notice for version 18.107.11: This firmware version is only available for MX64(W), MX65(W), MX84, MX100, and vMX100 appliances. Any other devices configured to this firmware version will not upgrade. The devices we are using are not in this list.   Regards ... View more

Ran into this issue this morning as well ... View more

I do it was a internal DNS issue in my case. At that time I was using same domain name for both internal/external and although it worked with my Att router originally my assumption is it broke when I migrated to the MX. I've since moved to split brain DNS for my AD and also bought a public IP block so I use public IP on the MX outside interface essentially removing MX from being behind NAT device and allowing NAT at the MX ... View more