Meraki

Bob_Flynn

Thanks for helping the old septuagenarian shade-tree IT guy. It works:-)

Bob_Flynn

Not sure how to accomplish this. I tried VLANs and source based static routes. Connecting LAN ports between MXs. Couldn't use static routes because it would list an error that static routes can include VLANs. Downstream switches are layer 2 Dell PowerConnect.

Bob_Flynn

Not sure how to do it. I tried creating a VLAN on each device and then using source based default routes. But could not access anything on opposite device. The event log would list ip conflicts. Couldn't use the static route because it would give an error that static routes cannot include VLANS.

Bob_Flynn

I have 2 MXs MX64 uplink 1 to Comcast Business via static IP Subnet 192.168.0.0/24 Connected on the LAN to Dell PowerConnect 2848 Layer 2 Switch MX250 Uplink to Xfinity via DHCP IP Subnet: 10.0.0.0/24 Connected on LAN to Dell PowerConnect 2824 Layer 2 Switch Is there away to connect the 2 subnets via the LAN side so that I can RDP from one subnet to the other? Everything I have tried fails to work.

Meraki

Community

About Bob_Flynn

Bob_Flynn

Community Record

Badges

Re: Connecting 2 MXs via the LAN

Re: Connecting 2 MXs via the LAN

Re: Connecting 2 MXs via the LAN

Connecting 2 MXs via the LAN