Meraki

James_Hawkins · ‎Aug 20 2025

Thanks for the response. I enabled MQTT on the APs but was still not seeing any messages. I did some packet captures and could see packets being sent to the broker containing topics. What I did notice in the captures was that the letters in the MAC addresses in published topics were in upper case. When I changed the topic subscriptions in the client to match the messages were received.

James_Hawkins · ‎Aug 20 2025

Hello, I have a few sensors which I am trying to set up MQTT for. I have followed the MT MQTT Setup Guide linked below but the sensor data does not seem to be getting to the broker. (https://documentation.meraki.com/MT/MT_General_Articles/MT_MQTT_Setup_Guide) I am using broker.hivemq.com with TCP port 1883 without TLS or user login. Below is one of the topics which should be published to the broker but I do not see any messages. meraki/v1/mt/L_727331339820341184/ble/08:f1:b3:2c:18:f2/temperature I can publish messages to the broker from MQTT Explorer running on my Mac so the broker seems ok. Is there anything else I need to do to allow MQTT messages from the sensors to be sent out?

James_Hawkins · ‎Mar 25 2024

If this API does not exist it should do! The Meraki product range is small in comparison to Cisco's so why not have this?

Meraki

Community

About James_Hawkins

James_Hawkins

Community Record

Badges

Re: MQTT Sensor Setup

MQTT Sensor Setup

Re: Looking for EoL API

Re: MQTT Sensor Setup