Meraki Community

jroegner · ‎Apr 7 2020

In a case with Cisco and Apple we found the problem in Apple's iOS 13. With the release of iOS 13.4 the issue is fixed and Meraki L2TP client vpn is working fine in combination with AMP and Umbrella again.

jroegner · ‎Oct 5 2019

No I can't find anything in the log. I'm thinking about a phase 1 problem. But I can't find out why. And no, no adult content. It's also interesting that the same VPN connection could be established from a Macbook with AMP for Endpoints Connector installed.

jroegner · ‎Oct 4 2019

The Meraki L2TP client VPN set up had no problem connecting with iPhone / iPad client. Since Cisco AMP for Endpoints (Clarity) is enabled via Meraki MDM it is not possible to establish a connection. The iOS device displays the error "The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator." This happens with WLAN as well as with cellular network. The AMP profile is only "Audit" Any ideas?

jroegner · ‎Jun 25 2019

Hi Felix, click on Switch --> Configure --> Routing & DHCP Then click "Create an interface" Even on a L2 Switch you can create an interface in the VLAN you need and configure a DHCP Relay address. Regards Johannes

jroegner · ‎Jun 25 2019

I have a new avatar Warriors @ Oracle Arena

Meraki Community

About jroegner

jroegner

Johannes Roegner

Community Record

Badges

Re: L2TP Client VPN connection on iOS with Cisco AMP (Clarity)

Re: L2TP Client VPN connection on iOS with Cisco AMP (Clarity)

L2TP Client VPN connection on iOS with Cisco AMP (Clarity)

Re: ip helper

Re: Update your avatar, win Meraki swag!

Re: L2TP Client VPN connection on iOS with Cisco AMP (Clarity)

Re: ip helper

Re: Update your avatar, win Meraki swag!

Re: L2TP Client VPN connection on iOS with Cisco AMP (Clarity)