Meraki

alemabrahao · ‎Mar 31 2022

Speed test is based on ICMP 🙂

alemabrahao · ‎Mar 31 2022

On speed test which IP is shown to you from wan1 or wan 2? Check It: https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Preferences#Load_Balancing

alemabrahao · ‎Mar 31 2022

I'm confused, because you sad "even if when I check public ip and speedtest.net its showing the wan2 details"

alemabrahao · ‎Mar 31 2022

@RaphaelL , I think that is not the case. check my answer above.

alemabrahao · ‎Mar 31 2022

If you are testing with ICMP it's normal, check the note:

alemabrahao · ‎Mar 31 2022

@LC_IT conseguiu resolver seu problema?

alemabrahao · ‎Mar 30 2022

It's my new data center 🙂

alemabrahao · ‎Mar 30 2022

In this case, IP SLA is the best way in my opinion.

alemabrahao · ‎Mar 30 2022

I assumed that the gateway for your local LAN is the switch core, right? What is de model of your switch? Maybe you can create a route map on this switch.

alemabrahao · ‎Mar 30 2022

Yes.

alemabrahao · ‎Mar 30 2022

Well, so It should be work, perform a packet capture on the dashboard to verify if you receive any answer.

alemabrahao · ‎Mar 30 2022

And make sure that your public IP is allowed to access port 1500 on your cloud service.

alemabrahao · ‎Mar 30 2022

Do you have how many WAN links? Try to create a flow preference using a preferred uplink:

alemabrahao · ‎Mar 30 2022

But, maybe you can request It to Meraki support: https://community.meraki.com/t5/Security-SD-WAN/Source-NAT-for-VPN-traffic-Branch-office/m-p/60789

alemabrahao · ‎Mar 30 2022

With Meraki It's not possible. 😕

alemabrahao · ‎Mar 30 2022

Well, I have checked, and you are right, now It is possible to change the password. Sorry for my mistake.

alemabrahao · ‎Mar 30 2022

No, I assumed that you are using Meraki Cloud Authentication. 😊 As far as I record the option to change the password is only for guest wifi users.

alemabrahao · ‎Mar 30 2022

Yes

alemabrahao · ‎Mar 30 2022

Yes, this is true. No, they can't change their passwords by themselves. 2FA is just to dashboard admin it is not applicable for guest users.

alemabrahao · ‎Mar 30 2022

In my experience, you can only NAT from outside to inside LAN and Site-to-site VPN Translation https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_MX https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

alemabrahao · ‎Mar 30 2022

is the DMZ network a network directly connected to the MX?

alemabrahao · ‎Mar 30 2022

I think it will be renovated by Meraki. 😊

alemabrahao · ‎Mar 30 2022

Is The Client IP assignment NAT mode or Bridge mode?

alemabrahao · ‎Mar 29 2022

I think a good test might be to configure a port in access mode on each VLAN and test the connection with a laptop to validate that the connection to each VLAN is working as expected.

alemabrahao · ‎Mar 28 2022

No, Does your MX support AnyConnect?

About alemabrahao

alemabrahao

Alessandro Abrahao

Community Record

Badges