Have you checked this article?   https://documentation.meraki.com/MX/MX_Installation_Guides/vMX_Setup_Guide_for_Microsoft_Azure#Before_You_Begin   I don't know if It can help. ... View more

If you are not using an SM, on dashboard alerts, you can check this information:   Clients connect or disconnect from the LAN Sends an email if select clients connect or disconnect from the LAN, as observed by the MX. The MX sends an ARP request to the client approximately every ten seconds to monitor its connectivity status. If the MX does not receive an ARP reply from the client after approximately 35 seconds, it considers the client to be disconnected. Once the client begins sending data through the MX and responding to ARP requests, it will again be marked as connected. https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Alerts_and_Notifications ... View more

How much time have you configured on SM Alerts?     ... View more

@Thácto,   Não tem como direcionar esse tráfego para um túnel VPN. Qual a necessidade? Se conseguir explicar melhor talvez eu consiga ajudar com alguma ideia. ... View more

Probably CW9162 supports because It uses the same firmware, but talking as a Wi-Fi design in my opinion It really doesn't make any difference. ... View more

For me, It's unnecessary, you can create a SSID for It, the result will be the same. It's my opinion, I have performed a lot of site survey without enable this mode and I have never had an issue.  ... View more

@stgonzo,   What are you talking about? I didn't find a menu to set MR to site survey mode. Can you show the print screen?   Edited:  Do you have a software to perform a site survey?  ... View more

It's an old post, but can help you:   https://community.meraki.com/t5/Developers-APIs/Put-API-L3-firewall-rules/m-p/85541 ... View more

You can get It on change log, but It has a short time retention:   24 months rest of the world and 12 months on EUA.       https://documentation.meraki.com/General_Administration/Privacy_and_Security/Cloud_Data_Retention_Policies ... View more

Have you tried this?   https://developer.cisco.com/meraki/api/#!get-organization-license-state ... View more

  How is your configuration? ... View more

The VPN Client is being advertised on Auto VPN? If yes, It can be a Windows issue. Try to update Windows. ... View more

Are you using L2TP?   On VPN configuration > TCP/IPv4 > Advanced, disable default gateway to remote network or something like that:         ... View more

Do you have a Cisco DNA license? If yes, you don't need to purchase a Meraki license.   Edited:   https://meraki.cisco.com/wp-content/uploads/2022/09/quick-start-migrating-cisco-DNA-management-mode-to-meraki-management-mode.pdf ... View more

@RJones,   It's not a new account creation, look, for example If you add my e-mail as an administrator in your organization It will be showed on my MSP portal, but my e-mail is an existent account on Meraki dashboard, so maybe someone did It using your e-mail, but maybe It was a mistake.   You got It? ... View more

Yeah, but when you have permission on another organization (even read-only) it will show on MSP portal, maybe someone added your email by mistake. ... View more

Are you sure you don't have admin access on organizations? ... View more

In all my customers I use Public IP without a CG-NAT, It has been working well. So I assume that the answer is yes. 🙂 ... View more

You are correct. I tested here with port forwarding, but the connection was not established. I saw on logs that the connection was closed. 😕 ... View more

I observed some people talking about the same issue when ISP uses CG-NAT, but I don't know If the issue was solved.   Is it possible to ask your ISP to create a port forwarding for these ports?   I will try to simulate It here. ... View more

Are they using CG-Nat ? ... View more

I've tested the VPN client on all my clients running the same version, and it worked without any issues. That's why I believe it is something before the MX. ... View more