Check Security Center event log to see if there is anything blocking.   https://documentation.meraki.com/MX/Monitoring_and_Reporting/Security_Center ... View more

I have not found a way to block/whitelist a group of IPs like this. ... View more

Are you using Enterprise versions of Windows 10? ... View more

Not directly what you are looking for but you could put a custom message on the splash page saying how long the sessions will be good for (24hrs, 5 days, 30 days, etc.) ... View more

You could try registering for ECMS1 and use the free lab time to play with stuff.   If you use a demo dashboard I don't think you will get API access.   I think the best option would be to get a small set of demo hardware (try before you buy is the Meraki way!) then test as much as possible and then procure more hardware when your trial is done if it was a good fit. I think this is the best way to simulate real world use for customers and non-partners. If you are a partner there are other options. ... View more

2 places I believe to check and add themselves back.   1) Default network wide alerts https://documentation.meraki.com/MR/Monitoring_and_Reporting/Configuring_Network_Alerts_in_Dashboard   2)Full Org Admin I believe anybody listed a full org admin will get emails. Might need an add/remove to clear any previous behavior ... View more

I believe online and added to inventory will be different dates. ... View more

I am a bit unsure what you are trying to see.   This might be the view you are asking for.  Organization>Monitor>Overview   https://documentation.meraki.com/zGeneral_Administration/Inventory_and_Devices/Organization_Overview ... View more

@MeredithW Thanks for the post. I will have to think about a nomination. As always thanks for all your help in giving us this commmunity.   @jdsilva Thanks! I looking forward to contributing and learning more here in the community.   @Nash Yes Meraki is great. We are working on putting together a full managed Meraki offering. I would say the ECMS1 training isn't too salesy. Nice thing is that there was a couple hours of full lab play time, which is nice for help desk people to get in and break stuff and work through issues. Also the sessions don't take very long and at the end of each session you may end up with 20-40 mins of free time to explore the lab. Your other option is get some NFR gear and make your own lab. Use an API (pretty sure you got that covered) to setup and then break the lab. Then let help desk troubleshoot. I would say Meraki 360 is more technical and you get a free AP, so you might try that. ... View more

The Personal Storage category is where Drive will fall. You could try blocking that way, but it may block other sites you don't want to.   Can you share a screenshot of your URL whitelist?   If not these docs might be helpful to review the details of the URL whitelist and some troubleshooting steps.   https://documentation.meraki.com/MX/Content_Filtering_and_Threat_Protection/Content_Filtering   https://documentation.meraki.com/MX/Content_Filtering_and_Threat_Protection/Content_Filtering/Content_Filtering_Troubleshooting   ... View more

My suggestion is to setup a VLAN for guest ssid. Then use a flow preference on the MX to force the guest VLAN traffic out WAN1.   https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Preferences ... View more

Assuming you have started with this document. https://documentation.meraki.com/MR/Splash_Page/Integrating_Active_Directory_with_Sign-On_Splash_Page_For_MR_Access_Points   Good place to start troubleshooting might be these docs https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Active_Directory_Issue_Resolution_Guide   https://documentation.meraki.com/MR/Splash_Page/Troubleshooting_Active_Directory_Authentication_issues_with_Splash_Page_using_Windows_Event_Viewer ... View more

True that it should show connected to the cloud even if not in a network, but I think it must be added to inventory in an organization first.   https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page ... View more

If you are talking AP light then yes.    If you are talking ethernet port lights, then maybe.   The below doc hasn't been updated with new Wifi 6 APs @CameronMoody    https://documentation.meraki.com/MR/Other_Topics/Run_Dark_Mode ... View more

No, it seems like Sponsored Guest is the new preferred guest method.   https://documentation.meraki.com/MR/Encryption_and_Authentication/Sponsored_Guest ... View more

https://documentation.meraki.com/SM/Monitoring_and_Reporting/MDM_Commands_in_Systems_Manager ... View more

I am assuming you are using Python. This might be a good place to start.   https://docs.microsoft.com/en-us/azure/azure-functions/functions-create-first-function-python   Another place to check is the NSG rules and see if anything might be blocking.   Last test would be try another known more open basic API ... View more

From the screenshot I don't see any common items (os, location, etc.)   This might be a good place to start on the device. Finding out what is going on one of them will probably allow you to make the fix for all of them more easily.     Is your device associated to a wireless access point and is a connection to the Internet available? Look in Settings > General > Device Management.  Are the Meraki Management and any additional configured profiles listed there?  If so, does the Meraki Management profile description accurately reflect that of your Systems Manager dashboard network name? Install Apple Configurator to a workstation, plug in the iOS device via USB, and look at the console output of the device.  You should see events in the output that start with "mdm". ... View more

Are you on current firmware? Have you rebooted the switch to see if that resolves the issue? ... View more

I would prefer not going through all that and just setup an SSID for provisioning. Either only you or your team know the password and or all MAC addresses are blocked unless whitelisted. As extra security setup alerting to email you and or the team when devices are whitelisted/joined. ... View more

Since you have narrowed down the issue to be reproduced by firmware upgrade, I would call support and have them working on determining the exact issues and version of firmware that this is happening on.   The other thing I would check is the route table before and after the firmware upgrade.   https://documentation.meraki.com/MX/Networks_and_Routing/Route_Table ... View more

The data shows that you are getting to OpenDNS regardless of if you use it or not. Checking the DNS settings on the MX, MS, and AP are the first place to start. ... View more

Cisco technically owns OpenDNS now and is pulling it under the Umbrella name. Not sure if there is some overlap in the changes. I would check all DNS settings on the MX, MS, and AP, then if nothing is found to point to an OpenDNS server then dive down to the client level. If you can source the IP that OpenDNS is using then run a packet capture to find which clients are making calls there. ... View more

I believe the default is 30 days. ... View more