@Troy360have you made a wireless capture from the AP you're connecting to or an over the air capture through another AP on the same channel. You have to first determine at what phase your sharp device is stuck. A full WPA2 PSK auth would like like this: Client to AP: Auth AP to client: Auth success Client to AP associate (if this is missing client probably does not like association params) AP to client: assoc success or fail (if fail check!, could be some reason code) AP to client: 1st message of 4 way handshake (shows as dot1x even for pre-shared key) Client to AP: 2nd message (this one gets stuck if you have wrong PSK) AP to cleint: 3rd message Client to AP: 4th message Client does the DHCP DORA dance. Do mind that if you capture from the AP you are connecting to you'll only have half of the messages (Meraki issue) It's better to have another AP on the same channel and capture there. Then you'll have the entire conversation.
... View more