I looked through the documentation but couldn't see if adding multiple destinations under the wireless > Firewall & traffic shaping is possible. The entry box will let me enter them on individual lines but I'm not sure if this is the proper way to do it besides adding multiple rules for each IP address/subnet I want to block specific access to.
Solved! Go to solution.
It is not possible to add multiple destinations to the same rule.
It is not possible to add multiple destinations to the same rule.
Like this? Keep clicking "Add".
Not quite, the specific setting I'm looking at is under a wireless firewall and traffic shaping for rules when connected to a SSID
Doh. For some reason, I thought you meant traffic shaping rules.
Hi @db3 ,
If your goal is to block IP/Subnets, there are a few ways this can be achieved. This does depend on your design though. E.g. Enabling a Group Policy to block traffic is a great way.
https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/MR_Firewall_Rules