Wireless Access in Nat Mode, need to access wireless scanner from Lan

[Mike128]

We use scanners in our company that can be wireless,  our Meraki wireless is configured with Nat Mode

"Clients receive IP addresses in an isolated 10.0.0.0/8 network. Clients cannot communicate with each other, but they may communicate with devices on the wired LAN if the SSID firewall settings permit."

What SSID Firewall rule would I have to use to allow the wired computers to see the wireless scanner?

Thanks in advance.

[KarstenI]

You need to configure bridge mode for this:

“Inbound client connections - NAT mode with Meraki DHCP prevents inbound connections to a wireless client”

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/NAT_Mode_with_Meraki_DHCP#Common_...