Setting up SSID for VLAN 60 on MR56

[DanielBHSNIT]

I'm replacing Aironet AP's with MR's and I'm trying to replicate the configuration in the dashboard, not 100% sure on how to do it.

I have an SSID that I want to get its IP and routing information from a router (Cisco 891F) which has that DHCP pool set on the VLAN60 interface, the switchports are appropriately trunked in between but how do I tell/configure the access point that for this particular SSID use VLAN60?

[ww · Accepted solution]

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/VLAN_Tagging_on_MR_Access_Points

If 60 is your native vlan then choose "dont use vlan tagging"