Meraki

amalogi · ‎Oct 5 2021

Hi all,

I have set an SSID with tagged vlan that is working correctly, but when i want to reach other vlan on same nwtwork i'm reciving response from 10.128.128.128 the network is not reachable. So I think the AP don't have any route rule.

Thanks for your help

DarrenOC · ‎Oct 5 2021

Hi @amalogi

What do you have under Wireless > Configure > Firewall and Traffic shaping > Block IP's and Ports

Is your rule set to Allow or Deny

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

DarrenOC · ‎Oct 5 2021

Hi @amalogi

What do you have under Wireless > Configure > Firewall and Traffic shaping > Block IP's and Ports

Is your rule set to Allow or Deny

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

amalogi · ‎Oct 6 2021

Hi @DarrenOC ,

It was set to deny, many thanks for your help!

Meraki

Community

Routing problems with MR wifi

Routing problems with MR wifi