Question regarding radius proxy configuration

Solved
Dardan
Conversationalist

Question regarding radius proxy configuration

Hello guys,

 

After having read the Meraki configuration regarding external Radius setup, I noticed it is stated I should expose my Radius server to the Internet. However, this is not possible in our current network infrastructure. So I configured one AP (for testing purpose) with local Radius IP (our infrastructure is basically a Metropol Area Network so our routers use internal IPs s and routes) and it seems to be working. Now if I want to configure other APs (63 in total) to be authenticated on my Radius server, do I have to create 60+ client entries on my Radius server (for each AP) or is there anyway to configure for instance 2 APs which would be acting as Radius proxies? The purpose would be  to direct Radius traffic from the 60+ other APs to those "proxified" APs and avoid inserting many radius entries.

 

To sum up, the scenario would look like:

2 APs (proxies) configured with my Radius server infos and authenticated on my Radius server.

60+ APs configured with these proxies IPs <-- no need to allow these APs on my Radius server.

 

Thank you in advance for your help.

Regards

1 Accepted Solution
ww
Kind of a big deal
Kind of a big deal

You need to add them all.

We put them in management subnets.  And then add the subnet to the radius.

 

View solution in original post

3 Replies 3
ww
Kind of a big deal
Kind of a big deal

You need to add them all.

We put them in management subnets.  And then add the subnet to the radius.

 

PhilipDAth
Kind of a big deal
Kind of a big deal

You don't mention what RADIUS server you are using - but every RADIUS server I have used allows you to specify a subnet for RADIUS clients.

I NEVER add the APs as individual clients.  Tedious.

 

So where it asks you for an IP address in your RADIUS server, try putting in a subnet (e,g. 10.0.0.0/8).

Dardan
Conversationalist

It is freeradius and of course I can specify a subnet for clients. Thanks.

Get notified when there are additional replies to this discussion.