Meraki

Community

Problems in Windows Radius NPS and Meraki SSID 802.1.x Configuration

LuisTorresRojas
Conversationalist
Monday
Monday

Problems in Windows Radius NPS and Meraki SSID 802.1.x Configuration

Hello everyone!

I am currently configuring a new Radius NPS (Windows server 2022) for 802.1x authentication of my corporate SSID users. I have made the configurations according to the Meraki instructions, but I am unable to validate the users.

- The radius is already integrated into the AD.
- There is communication between the Meraki AP and NPS (bidirectional ICMP and Radius ports), it was also tested without a port filter.

Do you have any documentation or video that I can use to configure and validate the official one on the site?

Meraki instructions:
https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_...


Regards!

Labels:
0 Kudos
2 Replies 2
alemabrahao
Kind of a big deal
Kind of a big deal
Monday
Monday

Maybe it will help you.

 

https://www.youtube.com/watch?v=Iput9nLnldA

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
cmr
Kind of a big deal
Kind of a big deal
Tuesday
Tuesday

What errors are you seeing in the logs of the APs and the RADIUS server?

If my answer solves your problem please click Accept as Solution so others can benefit from it.
0 Kudos
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels
© 2024 Cisco Systems, Inc.