New Wireless RC 31.1.6 - Lots of Fixes

Mloraditch
Head in the Cloud

New Wireless RC 31.1.6 - Lots of Fixes

Lots of Bug Fixes, several having to do with Radius that sound suspiciously like random forum posts I've seen!


EDIT: "Sporadic packet loss & instability on Layer 3 roaming & Teleworker VPN SSID's (Wi-Fi 6, Wi-Fi 6E APs)" was moved to fixes by Meraki after the original post. Very very long outstanding bug that may finally be fixed.

 

Important note

Bug fixes

  • General stability and performance improvements
  • MR56 ethernet port flaps occur when connected to C9300-48UN(V04) at 5Gbps speeds
  • MR57 ethernet port flaps occur when connected to MS355 at 5Gbps speeds
  • MR46 not responding to Probe Requests from clients
  • Channel & power not configurable via LSP on CW9163E APs
  • Wildcard NAS-IPv6-Address AVP sent on config change (Wi-Fi 6, Wi-Fi 6E APs)
  • NAS-IP-Address discarded (Wi-Fi 6, Wi-Fi 6E APs)
  • RADSec authentication failures (Wi-Fi 6, Wi-Fi 6E APs)
  • DHCP offer is not forwarded if broadcast flag is set (Wi-Fi 7 APs)
  • mDNS traffic blocked (Wi-Fi 7 APs)
  • SSIDs broadcast on 6Ghz despite being disabled when using WPA3 transition mode (Wi-Fi 7 APs)
  • Sporadic packet loss & instability on Layer 3 roaming & Teleworker VPN SSID's (Wi-Fi 6, Wi-Fi 6E APs)
If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
10 Replies 10
RaphaelL
Kind of a big deal
Kind of a big deal

Most important part : 802.11ac Wave 2 and older products will only upgrade to the backup version (MR 30.7.1)

 

😍

RWelch
Head in the Cloud
Head in the Cloud

Exactly ( ↖️🎉

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Paccers
Building a reputation

@cmrin shambles after being beaten to the release notes post 😏

cmr
Kind of a big deal
Kind of a big deal

Just sharing the love @Paccers 👍

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Paccers
Building a reputation

For me the 'Sporadic packet loss & instability on Layer 3 roaming & Teleworker VPN SSID's (Wi-Fi 6, Wi-Fi 6E APs)' item is listed under 'Bug Fixes' section

RaphaelL
Kind of a big deal
Kind of a big deal

Same here but I swear it was listed as a known issue. Might be a corrected typo

Mloraditch
Head in the Cloud

Yes i see that now too. I definitely just copied and pasted so they must have edited. Crazy if that's finally fixed

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
meraki-chris
Meraki Employee
Meraki Employee

Yes, that was a correction - moved to bug fixes

RWelch
Head in the Cloud
Head in the Cloud

@meraki-chris 👏 👏 👏 🎉

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
lotsofdots
Comes here often

I perfromed a rollback on my MR36H to MR 30.7.1. As posted already with MR 31.1.5.x, I also experience lags with MR 31.1.6 during longer Webex Calls (>30 minutes) and other usage like streams or "high" bandwidth and low latency connections. After 50 minutes call today, I even got a short loss of connectivity. With MR 30.7.1, at least with my MR36H in use, I have no issues. Someone else epxerience lags with MR36(H) and MR 31.x?

Get notified when there are additional replies to this discussion.