Need help meraki cisco MR33 - MR42

[BichNguyen]

I want to configuration wifi MR33 nad MR42 to created the password for the user, but the password only have value about two hours, after that time the user must to new passwords to connect. Please, support and guide to me ! Thanks so much, it will be great if I received the file data and video guide for this configuration. This my information my name's Bich, my email nguyenbich@lynguyen.company

[NolanHerring]

Seems like a nightmare to manage this but here you go:

https://documentation.meraki.com/MR/Encryption_and_Authentication/Managing_User_Accounts_using_Merak...

[BichNguyen]

Thanks for you help, your document was needy for me but do you know the method auto to created passwords code for this issue ?Because if wifi MR33 and MR42 used inside the coffcce shop then the customer very much we can not created passwords by hand or online 24 hours on the dash board only create passwords for user...

[NolanHerring]

I think you just want to use a normal splash page instead, with like verify email option enabled or something.

Take a look here: https://documentation.meraki.com/MR/Splash_Page/Self-registration_for_Splash_User_Accounts

This might be something you'll want to look at: https://www.splashaccess.com/

This might help as well: https://beambox.com

[BichNguyen]

I was found information needy, thanks so much !

[PhilipDAth]

Splash Access have a guest retail solution which can do this, and their pricing is pretty reasonable.

https://www.splashaccess.com/guest-captive-portals/#

[PhilipDAth]

You could also consider using something like the Facebook login feature with the splash page frequency option.

https://documentation.meraki.com/MR/Splash_Page/Facebook_Login

https://documentation.meraki.com/MR/Splash_Page/Splash_page_frequency

[BichNguyen]

Thanks you !