Meraki MX SNMP v3 to Cacti

Black
Comes here often

Meraki MX SNMP v3 to Cacti

I'm having a problem regarding Meraki MX which uses SNMP v3 to monitor Cacti ("System SNMP error"), what configuration should be for Meraki SNMP v3? can anyone help me pleaseee

4 Replies 4
alemabrahao
Kind of a big deal

 

Here are the steps to configure SNMP v3 on Meraki MX:

 

Log into the Meraki administrative interface, navigate to Organization > Settings.
Under SNMP, you can choose between DES and AES (128).
Provide the necessary details for SNMP v3.
Save your changes.

 

Here is a sample command to extract information via SNMP requests.

snmpget -v3 -l authPriv -u xxxxxx -a SHA -A snmpuser1 -x AES -X snmpuser1 snmp.meraki.com:16100 iso.3.6.1.2.1.1.1.0

 

SNMP Overview and Configuration - Cisco Meraki

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Black
Comes here often

hai sir,,
u maen like this, sir?

 

Black_0-1702318374968.pngBlack_1-1702318401255.png

 

alemabrahao
Kind of a big deal

Yup.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
alemabrahao
Kind of a big deal

Have you also enabled SNMP on the Network?
 
This is in Network-wide > Configure > General > SNMP access



alemabrahao_0-1702320630088.png

 

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Get notified when there are additional replies to this discussion.