Meraki Assign NAT Mode WiFi - Internet Traffic Flow Preference?

[Court]

We have two ISPs, I'd like to route our public WiFi SSID that is in Meraki Assigned NAT mode through WAN 2. How would I set that in the internet traffic flow preferences? I can't use 10.0.0.0/8 since that overlaps with our other internal subnets.

[alemabrahao]

I believe it will not work since the Ap's IP is used to access the internet when DHCP is set to NAT, but you can create a rule for the AP IP.

[KarstenI · Accepted solution]

You can use the IP of the AP to set the flow preference to WAN2. The MX will not see the "real" IPs, only the IP of the AP for this traffic. It will also match the dashboard traffic of the AP, but that should be no problem.