MR52 access point: switch from repeater mode to root mode

miguelbarajas
Conversationalist

MR52 access point: switch from repeater mode to root mode

Hi community,

 

In the office we have MR52 APs installed, however only one of them is in repeater mode (we have not made any changes) and we need this AP to work again in normal mode (root mode). Could you help me with this?

 

Thank you.

3 Replies 3
rwiesmann
A model citizen

Have you checked this:

https://documentation.meraki.com/MR/Monitoring_and_Reporting/Gateway_AP_Switches_to_Repeater_Mode

 

Also check the cable to the AP, if it is still o.k.

 

 

 

PhilipDAth
Kind of a big deal
Kind of a big deal

Out of desperation, trying giving it a reboot as well.

 

Does the switch port that it plugs into say anything bad?

rwiesmann
A model citizen

good idea to give it a reboot as well.

 

Usually I do not like the meshing feature and I normally turn it of.

 

https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/Wireless_Mesh_Networking#Disabli...

Get notified when there are additional replies to this discussion.