MR36H Port Issue

[MR36H]

Hi, 

Account Manager trying stuff : )

I have an MX75 connected to an MR36H.

This is one of 3 APs in the house, others are MR42s.

Plan was to place the MR36 in our family room and run an ethernet cable from the AP to the the TV.

The wireless is fine but I'm not getting connectivity via the cable to the TV.

Is there something I need to configure via the dashboard to allow for this?

Thanks Meraki Folk!

[Ryan_Miles]

Have you configured the port profile? https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/Port_Profiles

[MR36H]

Hi, I tried creating an SSID and enabling the port (2) to which the tv's been wired.

The port shows as green on the dashboard, tv shows as connected to the internet (LG TV) but only getting about 5 seconds of playtime (have tried Netflix, Amazon, HBO) and then it drops.

I'm sure I've incorrectly configured something.

Any suggestions?

Or I can wait until after the break and harass my Meraki TSA : )

Appreciate the help!

[Ryan_Miles]

Give it another try now. Also, you can just ping me via Webex to make this easier 😉