LocalAuth and 6E

Solved
The_Roo
Getting noticed

LocalAuth and 6E

I have a number of sites which are remote from the core network, for which I have deployed Local Auth. However, I want to upgrade the sites to 6E, which at present does not play nicely (in the Meraki world, anyway) with Local Auth.

I guess enabling 6E and Local Auth will need a F/W upgrade....any ideas as to when we might see that? 6E has been around since 2019, surely 6 years later and Meraki can't support it fully is a bit of a shortfall....

1 Accepted Solution
alemabrahao
Kind of a big deal
Kind of a big deal

Meraki supports it but fully integrating it with Local Auth is still a work in progress, I believe.
I would open a support case if I were you.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

1 Reply 1
alemabrahao
Kind of a big deal
Kind of a big deal

Meraki supports it but fully integrating it with Local Auth is still a work in progress, I believe.
I would open a support case if I were you.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco ID. If you don't yet have a Cisco ID, you can sign up.