Issue with DHCP lease and DHCP for SSID

Solved
heman023
Here to help

Issue with DHCP lease and DHCP for SSID

Hey All, 

 

I'm trying to get my AP to assign IPs from a DHCP pool i've created in my MX67, but it seems like there's a glitch. Is this also effecting the SSID's ability to give dhcp leases to devices that try to connect to it?

 

dhcp servers and ARP.png

 

firewall and traffing shaping rules.png

 

ip address given to office test is  correct.png

 

p1 of access control settings .png

 

p2 of access control settings.png

 

reporting of vlan 0.png

 

router vlans p1.png

 

switch port settings.png

 

1 Accepted Solution
DarrenOC
Kind of a big deal
Kind of a big deal

Set the port to the AP as a Trunk and set the Native to the Management VLAN - 201.

 

Then on your respective SSIDs set the required Vlan Tag

 

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

5 Replies 5
DarrenOC
Kind of a big deal
Kind of a big deal

Set the port to the AP as a Trunk and set the Native to the Management VLAN - 201.

 

Then on your respective SSIDs set the required Vlan Tag

 

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Thank you! 

DarrenOC
Kind of a big deal
Kind of a big deal

Hope that helped?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

It did, right when i applied  that management vlan it allowed me to get everything else up and running.

DarrenOC
Kind of a big deal
Kind of a big deal

Excellent. Caught me out too when I first started deploying this lot.

 

good luck with the rest of your testing 

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels