Hi Team,
I have new MR-46 access point, i want to assign manual IP address to this AP, i have connected the same with my access switch.
I don't have DHCP configuration in my switch, Without DHCP configuration through my laptop Can i assign manual IP to this AP.
Also please suggest other method's.
Thanks & Regards
Mohit Dhanjal
https://documentation.meraki.com/MR/MR_Installation_Guides/MR46_Installation_Guide#Static_Assignment
Hi Ryan,
Thanks for the update, i have already gone through this document.
My question is if DHCP is not working, which IP address i need to assign to my laptop, so that i can access AP local login page to configure manual IP.
Regards
Mohit
Hi Alemabrahao,
Thanks for replying.
Do i need to connect my laptop and AP to same switch for this procedure. Also Switch that i am using is Cisco 9300 switch, do i need to perform any configuration on the same as well.
Regards
Mohit
Just put both on the same VLAN
Do i require internet access when assigning manual IP's to access point. or without internet i can assign manual IP by connected laptop and AP in same VLAN
Do i require internet access when assigning manual IP's to access point. or without internet i can assign manual IP by connected laptop and AP in same VLAN
You don't need internet access, you just need to configure the static IP on your machine and access the AP via IP 10.1281.28.126.