Help with Port Profiles on MR36H

[RayR]

I'm trying to set up port profiles on an MR36H - but I'm confused.

The dashboard config settings list Ports 1 through 4 - BUT the device has an "unmanaged" port and three other ports (numbered 1 through 3).

So - I am confused.  Can I actually put a port profile on the unmanaged port?  And, if so, is it considered port 1 or port 4?

TIA

[Brash]

Do you have a screenshot of what you're seeing on the dashboard?

According to the installation guide, the ports are as follows (leftmost is the passthrough, and the LAN ports follow after that)

[RayR]

Dashboard view:

[RayR]

Never mind - Found my answer:

MR36H will use a 4-Port profile (same as MR30H), however, port 4 of the profile will not be used since the port does not exist on the AP. For more information about MR36H ports please visit installation guide.

[Ryan_Miles · Accepted solution]

Yes, this doc explains it https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/Port_Profiles

"MR36H will use a 4-Port profile (same as MR30H), however, port 4 of the profile will not be used since the port does not exist on the AP. For more information about MR36H ports please visit installation guide."